Making Use of
Natural Resource
The use of injection water in oil
production can considerably increase
the amount of oil removed from a
reservoir. Sea water is often used for
this purpose, however particles of dirt
and algae present in the sea water, can
damage the reservoir bringing about
plugging and affecting its permeability
leading to severe reduction in the
productivity of the well.
A filtration system is necessary to
prevent any induced damage caused by
unclean injection water. Following the
removal of the larger dirt particles with
a filter press, final polishing of the sea
water is achieved using an absolute
rated cartridge. This cartridge can be
protected by a prefiltration stage using a
bag filter or nominally rated cartridge
filters. A high pressure filter element
can also be used as a pre-caution for
final absolute wellhead filtration.
Benefits
- Reduces produced water steam to
below regulatory standards
- Retrofit existing hardware
- Treats fluids sufficiently to allow for
re-injection or disposable
Features
- Absolute rated cartridges
- High dirt holding capacity
- Wide chemical compatibility
ED2000ED2000 Series condensate drains are the reliable, easy to install, cost effective solution for condensate removal.
GuardflowGUARDFLOW absolute rated pleated filter elements are designed for use in the high pressure / differential pressure environments of the oil and gas industries.
Pleatflow NPLEATFLOW N filter cartridges have been designed specifically for oil field applications and can be used as a polishing filter for injection water or to filter completion fluids, protecting the well and removing dirt from brines that can lead to a decrease in productivity.
Sorbflow VSORBFLOW cartridges differ from those offered by other manufacturers where hydrocarbons are removed through surface adsorption onto the medium, SORBFLOW V cartridges employ a proprietary modified polymer that both absorbs and chemically binds the hydrocarbon molecules into its interior matrices.
TexflowTEXFLOW precision wound depth filter cartridges are manufactured to give a considerable dirt holding capacity coupled with high flow rates and low pressure loss.
